1-800-526-9087
a
 
Rockwell Hardness Testers
 
State of the art ultrasonic technology allows you to obtain ultra precise thickness measurements and store them to memory. This digital tester is capable of reading wall thickness down to 0.010" with a super high adjustable resolution of up to 0.0001". This dynamic sonic gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wage conductor as long as it has parallel top and bottom surfaces. The UTG-2650 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.
 

Specifications:

Model No. UTG-2650
Display type 4-digit LCD w/Back Light
Display Resolution Inch: 0.01", 0.001" or 0.0001" (selectable)
Metric: 0.1mm or 0.001mm (selectable)
Measuring Range Standard Mode: 0.010" - 0.787" (steel)
Accuracy +/-0.0002" (0.005mm) if thickness < 3mm
+/-0.002" (0.05mm) if thickness < 20mm
Sound velocity range 3280-32805 ft/s (1000-9999m/s) Adjustable
Upper/Lower Limit Preset Alarm Yes
Operating temperature 32-122 degrees F
Refresh Frequency 4MHz up to 25MHz
Memory 500 Test Values
Output N/A
Power supply AA alkaline batteries (2pc)
Battery life Approx. 200 hours (w/backlight off)
Power consumption Working current is less than 3V
Dimensions 5.86” x 2.87” x 1.25” (149 x 73 x 32mm)
Weight 5.6oz (160g)


UTG-2650 comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case.

 
ULTRASONIC THICKNESS GAUGE RESOURCES
Ultrasonic Thickness Gauge Accessories Ultrasonic Thickness Guage UTG-2000/2020 Calibration Guide
Principles of Ultrasonic Thickness Gauge Measurement Ultrasonic Velocity Chart
Ultrasonic Thickness Gauge Application Page NIST Links
UTG-1500 - Economy model-.001" resolution ASTM Links
 
 
 
HOME | RESOURCES | SERVICES | TRADE SHOWS | CONTACTS | LINKS
Copyright © UltrasonicWallThicknessGauges.com